Jinwen Premium SP Racing F3 NAZE32 Upgrade Controller PCB
- 01. No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
- 02. On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork (Standard and Deluxe).
- 03. Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
- 04. Stackable design - perfect for integrating with OSDs and power distribution boards.
- 05. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
- 06. Full support for OneShot ESCs for easy PID tuning and a sharper response.
- 07. Supports SBus, SumH, SumD, spektrum 11024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
- 08. Dedicated output for programmable LEDs - great for orientation, racing and night flying.
- 09. Dedicated I2C port for connection of OLED display without needing flight battery.
- 10. Battery monitoring ports for voltage and current.
- 11. Sonar support for precision low-altitude hold.
- 12. Buzzer port for audible warnings and notifications.
- 13. Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
- 14. Symmetrical design for a super tidy wiring.
- 15. Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
- 16. Barometer mounted on the bottom of the board for easy wind isolation.
- 17. Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
- 18. Configuration of the flight controller via a cross-platform GUI (Windows / OSX / Linux).
- 19. Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
- 20. The SPRacingF3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source means that you too can contribute to the system.
Đặc tính sản phẩm Jinwen Premium SP Racing F3 NAZE32 Upgrade Controller PCB
- Thương hiệu OEM
- SKU 246310612_VNAMZ-316360512
- Model 173038-5510551
- Loại bảo hành No Warranty
Đơn vị phân phối chính thức
Mua hàng trực tuyến (mua hàng online) mang lại sự tiện lợi, lựa chọn đa dạng hơn và các dịch vụ tốt hơn cho người tiêu dùng, thế nhưng người tiêu dùng Việt Nam vẫn chưa tận hưởng được những tiện ích đó. Chính vì vậy Chúng tôi hợp tác với Giao Hàng Nhanh được triển khai với mong muốn trở thành trung tâm mua sắm trực tuyến số 1 tại Việt Nam nơi bạn có thể chọn lựa mọi thứ… Chúng tôi có tất cả!
Phân phối bởi Giao hàng Nhanh - Bán hàng trên toàn quốc - Thanh toán khi nhận hàng - Đổi trả hàng miễn Phí
FOTGA NP-F Dummy Battery DC Coupler with Power Cable for Sony NP-F550/F570/F750/F770 NP-F960 NP-F970
Mã SP: 15700
5MP Camera Module Webcam Video 1080P+Transparent Holder for Raspberry Pi 4/3B +/ 3B/2B/Zero
Mã SP: 15699
Mã SP: 15698
Mã SP: 15697
Mã SP: 15696
Male D-Tap B Type Splitter Power Tap to 4-Port Female P-Tap Hub Adapter Battery Photography Power
Mã SP: 15695
Mã SP: 15694
M18 Battery PCB Board Charging Protection Circuit Board for 48-11-1815 M18 18V 1.5Ah 3.0AH 5Ah 6Ah
Mã SP: 15693
Mã SP: 15692
Mã SP: 15690
Mã SP: 15689
Mã SP: 15688
9Pcs/Set Lens Repair Tool Kit for Camera DSLR Ring Removal Rubber 8-83Mm Photo Studio Accessories
Mã SP: 15687
9PCS Removal Repair Wrench Clamp Tool Kit Flash Socket Ring Spanner for Leica M Serial
Mã SP: 15686
Mã SP: 15685
Mã SP: 15684
Mã SP: 15683
Mã SP: 15682
Tag: